High Carbon Steel (HCS) Multi Tool Saw Blades

10mm Plunge Cut HCS Saw Blade 

https://multitoolblades.net/10mm-hcs-plunge-cutting-blade.html

 

This High Carbon Steel saw blade gives you the ability to start cuts the centre of wood or plastic because of its plunge cut configuration. Perfect for moving quickly through wooden construction materials as well as plastic, you’ll be able to cut more accurately and more consistently thanks to the way that these blades are angled. These High Carbon Steel (HSC) multi tool saw blades move swiftly through your material without bogging down and without binding, clearing away waste quickly while you’re using your multitool. The offset design gives you an opportunity to cut different angles than you would have been able to otherwise, helping you to get this 10 mm wide blade into position without headache or hassle.

 

20mm Plunge Cut HCS Saw Blade 

https://multitoolblades.net/20mm-plunge-cut-saw-blade-quick-release.html

 

This 20 mm wide plunge cut blade takes advantage of High Carbon Steel (HCS), steel that offers a much more accurate cut and a finer finish on each individual cut than traditional bimetal options can. These blades also last a whole lot longer than bimetal blades (ranking right up there with carbide blades, in fact). The HCS blade material is also going to cut down significantly on vibration, giving you more control over your multi tool when it is in action while producing straighter and more accurate cuts, too.

 

34mm HCS Saw Blade 

https://multitoolblades.net/34mm-hcs-saw-blade-standard.html

 

If you need a wider multi tool saw blade that can quickly hack through plastic, wood, drywall, and masonry – pretty much everything except for metal – you are going to want to check out this 34 mm wide High Carbon Steel (HCS) saw blade. Designed to fit almost every 12 pin multi tool out there (thanks to its universal attachment configuration), the offset of this wider HCS multi tool blade lets you get different cutting angles on the material you are working with that would have been really difficult to pull off with a straight blade.

 

68mm HCS Saw Blade 

https://multitoolblades.net/68mm-hcs-saw-blade-quick-release.html

 

Regardless of whether or not you are cleaning up joints or tendons that you have cut or just need to take advantage of an offset and relatively thin saw blade to fit into a tighter spot on your project, the odds are good that you’ll find this 68 mm High Carbon Steel (HCS) blade as flexible and as versatile as you needed to be. HCS material of the saw blade provides a higher degree of accuracy on each individual cuts while at the same time prolongs the life of this blade – offering up to 30 times the utility that you would have received from a traditional bimetal saw blade.